Falcam Portable Top Hand Grip Overview

Key Features

• Compatible with F22 Ecology
• Nonslip & Durable Micarta Material
• Cold Shoe Interface
• 1/4"-20 Theads with Locating Holes

The F22 Portable Top Handgrip from Falcam is a sturdy and ergonomic top handle compatible with the entire F22 ecology. Augmented with durable Micarta material for anti-slip, anti-sweat, and moisture-proof reliability, the handle features multiple 1/4"-20 threads with ARRI-type locating holes and a handy cold shoe interface for mounting accessories. Its integrated F22 quick release mount makes it ideal for shooting on the go, giving you a quick and reliable handgrip solution that is always ready to work seamlessly with a wide range of camera cages.

Falcam M00A3402 Overview

Key Features

• N52 Type High Flux Magnet Tail Buckle
• For Ulanzi Falcam Maglink Quick Straps
• 18-Braided Dyneema Rope
• Use for Neck or Wrist Straps

This pair of Maglink Magnetic Tail Buckles from Falcam is a three-layer rope loop with a secure magnetic buckle. The loops are made from 18-braided Dyneema rope that can hold up to 132 lbs and has three layers to alert you when it's time to replace the buckles. The tail buckle is built in a N52 type high flux magnet with super suction force and can be used with other magnetic objects. You can use these buckles for multiple applications, including on a camera neck or wrist strap or on a phone wrist strap.

Dimensions

• Buckle Size: 8 x 12mm
• Lanyard Length: About 60mm
• Releasing Rope: About 22mm

Rope-Wearing Warning Design

When the yellow inner layer of the rope is exposed, it is time to replace it

FALCAM Maglink Quick Magnetic Buckle Wrist Strap (Blue) M00A3801B

Key Features

• Steady Tensile
• High Load-Bearing, Wear-Resistant
• Round Buckle Design
• Self-Locking Protection

The green Maglink Quick Magnetic Buckle Wrist Strap from Falcam is made of durable 3-layer braided Dyneema rope material to offer safety and a high-load bearing capacity. The strap converts to a bracelet in seconds. It has a built-in magnet, which connects and aligns the link to lock it firmly in place. The built-in magnets can also allow the ends to connect when not attached to the camera. This allows the strap to be securely worn until you are ready to attach your gear again. It automatically locks when the camera falls, safeguarding your device.

Features an N52 magnet for automatic and secure locking; easily released with one hand.

Made from 18-braided Dyneema rope, known for its durability and strength.

Pull the adjusting buckle with one hand at any time to adjust the length smoothly.

Combines soft PA66 webbing with flexible cowhide for comfort and style.

ABS+PC buckles protect your camera without scratching it.

Easily adjust the length with one hand.

Automatically locks when the camera falls, safeguarding your device.

The hidden magnetic buckle allows it to convert into a bracelet in seconds.

3-layer rope wear warning design, visible safety.

The static load bearing capacity is up to 110 lb.

Switch between different scenes with wrist strap, shoulder strap, and mini kit.

FALCAM Maglink Quick Magnetic Buckle Wrist Strap (Green) M00A3801

Key Features

• Steady Tensile
• High Load-Bearing, Wear-Resistant
• Round Buckle Design
• Self-Locking Protection

The green Maglink Quick Magnetic Buckle Wrist Strap from Falcam is made of durable 3-layer braided Dyneema rope material to offer safety and a high-load bearing capacity. The strap converts to a bracelet in seconds. It has a built-in magnet, which connects and aligns the link to lock it firmly in place. The built-in magnets can also allow the ends to connect when not attached to the camera. This allows the strap to be securely worn until you are ready to attach your gear again. It automatically locks when the camera falls, safeguarding your device.

Features an N52 magnet for automatic and secure locking; easily released with one hand.

Made from 18-braided Dyneema rope, known for its durability and strength.

Pull the adjusting buckle with one hand at any time to adjust the length smoothly.

Combines soft PA66 webbing with flexible cowhide for comfort and style.

ABS+PC buckles protect your camera without scratching it.

Easily adjust the length with one hand.

Automatically locks when the camera falls, safeguarding your device.

The hidden magnetic buckle allows it to convert into a bracelet in seconds.

3-layer rope wear warning design, visible safety.

The static load bearing capacity is up to 110 lb.

Switch between different scenes with wrist strap, shoulder strap, and mini kit.

FALCAM Maglink Quick Magnetic Buckle Wrist Strap (Grey) M00A3801

Key Features

• Steady Tensile
• High Load-Bearing, Wear-Resistant
• Round Buckle Design
• Self-Locking Protection

The green Maglink Quick Magnetic Buckle Wrist Strap from Falcam is made of durable 3-layer braided Dyneema rope material to offer safety and a high-load bearing capacity. The strap converts to a bracelet in seconds. It has a built-in magnet, which connects and aligns the link to lock it firmly in place. The built-in magnets can also allow the ends to connect when not attached to the camera. This allows the strap to be securely worn until you are ready to attach your gear again. It automatically locks when the camera falls, safeguarding your device.

Features an N52 magnet for automatic and secure locking; easily released with one hand.

Made from 18-braided Dyneema rope, known for its durability and strength.

Pull the adjusting buckle with one hand at any time to adjust the length smoothly.

Combines soft PA66 webbing with flexible cowhide for comfort and style.

ABS+PC buckles protect your camera without scratching it.

Easily adjust the length with one hand.

Automatically locks when the camera falls, safeguarding your device.

The hidden magnetic buckle allows it to convert into a bracelet in seconds.

3-layer rope wear warning design, visible safety.

The static load bearing capacity is up to 110 lb.

Switch between different scenes with wrist strap, shoulder strap, and mini kit.

Falcam C00B3804 Overview

Key Features

• Maintains Access to Controls & Ports
• Multiple 1/4"-20 & 3/8"-16 ARRI Threads
• Enables Vertical & Horizontal Shooting
• Anti-Slip Buffer Adhesive at Bottom
• Ergonomic Aluminum Alloy Construction

Outfit your Sony a6700 camera with an ergonomic aluminum alloy cage using this Quick Release Camera Cage from Falcam. Designed to custom fit your Sony a6700 camera, the quick release cage retains access to all your camera's controls and ports. Multiple 1/4"-20 and 3/8"-16 ARRI-style threads allow you to mount accessories such as articulating arms and secondary monitors on your rig.

The versatile cage is compatible with the full line of Falcam F22 and F38 quick release products and it features an F38 quick release interface that enables quick switching between vertical and horizontal shooting. An anti-slip buffer adhesive at the bottom provides a better and more reliable grip on the camera.

Compatibility

• Sony a6700
• Falcam F22 and F38 quick release accessories

Falcam C00B3604 Overview

Key Features

• Horizontal/Vertical Quick-Lock Switch
• Removable Rotating Ring Around Lens
• Multipurpose Mounts for F22, F38 & F50
• Fits Lenses with 83mm Maximum Diameter
• Durable Aluminum Construction

Add a fast-switch vertical-to-horizontal mounting option to your camera rig using an 83mm lens with this Horizontal-to-Vertical Quick Release Half Cage from Falcam. This handy aluminum half-cage rig mounts onto any Falcam F22, F38, or F50 receiver, and it slips around lenses with an 83mm maximum diameter.

The integrated ring secures around compatible lenses, and a quick-lock switch allows you to quickly rotate the camera 90° to move from horizontal to vertical shooting in seconds. The swivel ring is removable so you can use the mount without rotation. The camera mounting plate features a 1/4"-20 camera screw, 1/4"-20 threads on the bottom, and rubber padding to protect your camera.

Quick Features

• Half cage design with lens ring
• Central lock switch to quickly switch between horizontal and vertical shooting 
• Removable swivel ring
• Safeguard your camera with high-strength aluminum
• Non-slip design
• 0 to 90° positioning block
• Compatible with F22, F38, and F50 quick release systems

Compatible Lenses

Lenses with a maximum outer diameter of 83mm

Incompatible Lenses

Supports only some Canon RF prime lenses

Falcam C00B3603 Overview

Key Features

• Horizontal/Vertical Quick-Lock Switch
• Removable Rotating Ring Around Lens
• Multipurpose Mounts for F22, F38 & F50
• Fits Lenses with 75mm Maximum Diameter
• Durable Aluminum Construction

Add a fast-switch vertical-to-horizontal mounting option to your camera rig using a 75mm lens with this Horizontal-to-Vertical Quick Release Half Cage from Falcam. This handy aluminum half-cage rig mounts onto any Falcam F22, F38, or F50 receiver, and it slips around lenses with a 75mm maximum diameter.

The integrated ring secures around compatible lenses, and a quick-lock switch allows you to quickly rotate the camera 90° to move from horizontal to vertical shooting in seconds. The swivel ring is removable so you can use the mount without rotation. The camera mounting plate features a 1/4"-20 camera screw, 1/4"-20 threads on the bottom, and rubber padding to protect your camera.

Quick Features

• Half cage design with lens ring
• Central lock switch to quickly switch between horizontal and vertical shooting 
• Removable swivel ring
• Safeguard your camera with high-strength aluminum
• Non-slip design
• 0 to 90° positioning block
• Compatible with F22, F38, and F50 quick release systems

Compatible Lenses

Lenses with a maximum outer diameter of 75mm

Incompatible Lenses

Supports only some Canon RF prime lenses

Falcam C00B3605 Overview

Key Features

• Maintains Access to Controls & Ports
• Multiple 1/4"-20 & ARRI 3/8"-16 Threads
• F22/F38/F50 Quick Release, Shoe Mount
• Removeable Side Plate
• Wrist Strap Slot, Aluminum Construction

Protect and outfit your Sony a7R V, a1, or a7 IV camera with additional accessories using this gray Quick Release Camera Cage from Falcam. This cage maintains access to your camera's ports and controls while also offering quick release compatibility with Falcam F22, F38, and F50 accessories.

Multiple 1/4"-20 threads, an ARRI-style 3/8"-16 anti-twist thread, and a shoe mount allow you to mount articulating arms, on-camera monitors, or shotgun microphones on your rig. A removable side plate provides even more mounting possibilities. The cage is constructed of aluminum for durability and has a slot for a wrist or neck strap.

Compatibility

• Sony a7R V, a1, and a7 IV
• Falcam F22, F38, and F50 quick release accessories

Falcam C00B3A03 Overview

Key Features

• For Sony A7C ll  Mirrorless Camera
• F22, F38, F50 Quick Release Compatible
• Circular Half Cage Mounting Holes
• Strap Loop

The F22, F38, F50 QR Bottom Plate for Sony A7C ll from Falcam is a precision-fitted baseplate for the Sony A7C ll mirrorless camera body. This durable, aluminum plate features full access to the battery door, an integrated strap loop, and a stylish silver finish. Rubberized traction pads prevent camera movement and marring of the camera's finish. It's compatible with the full ecology of Falcam's quick relase products, including the F22, F35, and F50 receivers. In addition, it has threaded sockets for directly mounting to the Falcam Circular Half Cage rotating mounting rig.

Falcam F38B3810 Overview

Key Features

• For Switching Between Quick Mounts
• Dual-Hole Fixation Anti-Deflection

This aluminum alloy F38 & F50 Dual-Screw Quick Release Plate from Falcam is designed to allow users to quickly switch between quick-mount systems. A built-in 0.6" long slot features dual-hole fixation anti-deflection, and an integrated ear-hanging hole provides access for a camera strap.

Features at a Glance

• Quickly access the tripod and slide rail with an F38 or F50 quick-mount bayonet and switch between the two
• Anti-deflection baffle with anti-scratch POM material
• Non-slip rubber pad for improved camera stability
• Equipped with wrist strap ear-hanging hole
• Aluminum alloy construction

Falcam F22A3807 Overview

Key Features

• Works with Falcam F22 Accessories
• Single-Button Release
• Weighs Only 1 oz
• Aluminum Alloy Construction

The F22 Quick Release Plate to NATO Rail Adapter from Falcam combines an F22 quick release mount with a NATO rail to provide a wider range of mounting options for your F22-compatible accessories. The 1 oz aluminum alloy device features a single-button release system and is equipped with an ARRI-type positioning design, locking your gear with stable reliability.

Features at a Glance

• NATO rail can be attached via the F22 quick release mount
• Dual-screw hole accessories with an 18mm hole distance can be extended to the F22 quick release base
• Can be adapted to 18-29mm hole distance and installed to camera cage or other accessories by 1/4" threaded screw to expand F22 quick release base and mount
• Sturdy and drop-resistant aluminum alloy construction
• Lightweight and easy to use

Falcam F22A3805 Overview

Key Features

• Works with F22 Ecological Products
• Fast Assembly
• Aluminum Alloy Construction

Add accessories without angle adjustment needs to your Falcam quick release camera cage with this F22 Quick Release Dual Head Base from Falcam. Designed to work with F22 ecological products, this aluminum alloy mount allows for fast assembly and accessory expansion.

Falcam C00B3813 Overview

Key Features

• Form-Fitted for Sony a6700
• Works with All F22 & F38 Accessories
• Equipped with Wrist Strap Holes
• Anti-Slip Buffer Adhesive Bottom

The F22 & F38 Quick Release Bottom Plate from Falcam is form-fitted for the Sony a6700 and works with all accessories in the F22 and F38 ecology. It is equipped with wrist strap holes that will accommodate any strap with a width of 0.4" or less. The anti-slip buffer adhesive at the bottom provides a better and more reliable grip on the camera.

Falcam F22&F38&F50 Quick Release Foldable Half Cage Kit C00B3809

Key Features

• Two Rotating Shaft Designs
• Compatible with F22, F38 and F50 Quick Release System
• 1/4"-20 Threaded Holes
• ARRI Locating Holes &Strap Holes
• Wire Clamp Locating Holes
• Anti-mistouch & Anti-deflection Design
• Ultra-portable Foldable Design
• Half Cage's Flat State (maximum lever) Can Bear 4.5kg
• Fit Multiple Camera Models

Overview

The Falcam Foldable Half Camera Cage offers a versatile solution for various shooting scenarios. It features a unique dual-axis design that allows you to adjust the angles of the top, side, and bottom plates with ease, transforming it from a full cage into a half-cage configuration. The half-cage's bottom plate is equipped with an F38 quick-release interface, enabling effortless camera assembly and disassembly.

This cage is compatible with the F22, F38, and F50 quick-release systems, offering a range of attachment options such as 1/4" threaded holes, ARRI locating holes, wire clamp locating holes, strap holes, and cold shoe mounts to meet diverse expansion needs. It features a double-locking mechanism for enhanced stability, ensuring your camera stays securely in place.

The Falcam Foldable Half Camera Cage is compatible with a wide range of cameras, including Sony, Canon (R5/R6/R7/R10), Nikon (Z5/Z50/Z6/Z60/Z7), Fuji (XT series, XH series), and more. For certain blocky camera models like the Nikon Z8/Z9, the cage offers a unique vertical top plate installation method, similar to an L bracket.

With the option to pair it with Falcam F22, F38, F50, or Maglink quick release accessories, you'll experience seamless and fast transitions between different photography scenarios. Don't miss the opportunity to make your photography more versatile and efficient with the Falcam Foldable Half Camera Cage.

Camera Compatibility List

• Sony: A7 IV, A7R V, A7S III, A7 III, A7R IVa, A7R IIIa, A7C, A7C2, A6700, A6600, A6400, A6100, ZV-E1, ZVE-10, ZV1, FX3, FX30
• Fujifilm: X-T1, X-T2, X-T3, X-T4, X-T5, X-T20, X-T30, X-S10, X-S20, H1, X-H2S
• Lumix: S5, S5MK2, S5M2X, G9, DH6A, GH6L, G95D, G7, G100K
• Canon: R5, R6, R6MK2, R7, R8, R10
• Nikon: ZFC, Z30, Z5, Z50, Z6, Z60, Z7
• Sigma: FP, FPL
• Olympus: E-M10, OM-5, OM-1

Falcam F22&F38&F50 Quick Release Foldable Half Cage C00B3808

Key Features

• Two Rotating Shaft Designs
• Compatible with F22, F38 and F50 Quick Release System
• 1/4"-20 Threaded Holes
• ARRI Locating Holes &Strap Holes
• Wire Clamp Locating Holes
• Anti-mistouch & Anti-deflection Design
• Ultra-portable Foldable Design
• Half Cage's Flat State (maximum lever) Can Bear 4.5kg
• Fit Multiple Camera Models

Overview

The Falcam Foldable Half Camera Cage offers a versatile solution for various shooting scenarios. It features a unique dual-axis design that allows you to adjust the angles of the top, side, and bottom plates with ease, transforming it from a full cage into a half-cage configuration. The half-cage's bottom plate is equipped with an F38 quick-release interface, enabling effortless camera assembly and disassembly.

This cage is compatible with the F22, F38, and F50quick-release systems, offering a range of attachment options such as 1/4" threaded holes, ARRI locating holes, wire clamp locating holes, strap holes, and cold shoe mounts to meet diverse expansion needs. It features a double-locking mechanism for enhanced stability, ensuring your camera stays securely in place.

The Falcam Foldable Half Camera Cage is compatible with a wide range of cameras, including Sony, Canon (R5/R6/R7/R10), Nikon (Z5/Z50/Z6/Z60/Z7), Fuji (XT series, XH series), and more. For certain blocky camera models like the Nikon Z8/Z9, the cage offers a unique vertical top plate installation method, similar to an L bracket.

With the option to pair it with Falcam F22, F38, F50, or  quick release accessories, you'll experience seamless and fast transitions between different photography scenarios. Don't miss the opportunity to make your photography more versatile and efficient with the Falcam Foldable Half Camera Cage.

Camera Compatibility List

• Sony: A7 IV, A7R V, A7S III, A7 III, A7R IVa, A7R IIIa, A7C, A7C2, A6700, A6600, A6400, A6100, ZV-E1, ZVE-10, ZV1, FX3, FX30
• Fujifilm: X-T1, X-T2, X-T3, X-T4, X-T5, X-T20, X-T30, X-S10, X-S20, H1, X-H2S
• Lumix: S5, S5MK2, S5M2X, G9, DH6A, GH6L, G95D, G7, G100K
• Canon: R5, R6, R6MK2, R7, R8, R10
• Nikon: ZFC, Z30, Z5, Z50, Z6, Z60, Z7
• Sigma: FP, FPL
• Olympus: E-M10, OM-5, OM-1

FALCAM F38 ZHIYUN QUICK RELEASE KIT
FOR CRANE M3 2858

- SCORE 9

KODE BARANG : 280723C

SCORE / NILAI KONDISI BARANG INI ADALAH
9 = Item ini menunjukan ada nya tanda penggunaan tetapi sangat bersih

BERIKUT ADALAH TABEL SCORE BARANG USED ITEM DI DOSS
10 = Item ini sudah dimiliki sebelum nya tapi tampak seperti barang baru
9+ = Item ini menunjukan sedikit tanda penggunaan atau tidak ada tanda - tanda pengunaan sama sekali
9 = Item ini menunjukan ada nya tanda penggunaan tetapi sangat bersih
8+ = Item ini menunjukan bekas penggunaan dan terdapat baret medium
8 = Item ini menunjukan bekas penggunaan yang sering dan terdapat penyok / baret
7 = Item ini menunjukan bekas penggunaan yang cukup banyak atau lebih dari penggunaan pada biasa nya

KONDISI FISIK & FUNGSI :
KONDISI SCORE = 9
FUNGSI : NORMAL

Minus Kondisi :
- TIDAK ADA

KELENGKAPAN :
- BOX
- 1 SET ITEMS

Setiap Pembelian USED ITEM* dari DOSS akan mendapatkan GARANSI FUNGSI 1 BULAN
.
* = USED ITEM YANG BERGARANSI RESMI DARI BRAND DAN BUKAN GARANSI TOKO ATAU INTERNASIONAL
.
Pembelian dengan Cicilan 0% , kamu dapat mengunjungi Toko Online DOSS yg ada di :
- Tokopedia
- Bukalapak
.
COD :
DOSS RATU PLAZA

Same Day Delivery
Gojek & GRAB

FALCAM F38&F50 Quick Release Plate for Ronin Stabilizer Handle Bottom 3370

Key Features

• Compatible with DJI RS 3 Mini / RS 3/ RS 2 / RSC 2 stabilizer handle, F38 & F50 quick release ecology.
• Quick release, no need to screw.
• Stable and secure, multi-axis camera movement is stable without any shaking.
• Built-in strap holes can be connected to a rope/wrist strap/shoulder strap for carrying.
• One-piece pad increases the contact area protecting the machine from scratches.
• Anti-loose gaskets can effectively prevent the screws from loosening, and the camera lock is more secure.

FALCAM F22 Quick Release Sling Grip for Stabilizer V2 F22A3505

Key Features

• Effortless to Low-angle Shooting: Applied with F22 Quick Release Hand Grip (optional), it is more comfortable to hold, which effectively assists low-angle shooting, and reduces the pressure of holding for a long time.
• Smooth Quick Release Experience: Built-in F22/F38 quick release interfaces, no need to screw, it can realize efficient switching of quick assembly and disassembly, which can greatly improve the work efficiency of photographers.
• Left-Right Available Installation Direction can be Selected: The center of gravity can be kept either in the left or right installation, and the installation direction can be selected according to the usage habits of the left and right hands
• Compatible with DJI Ronin Stabilizer Series: Equipped with F22 DJI Ronin Side Panel, and built-in double M4 screws, it can be stably fixed in the DJl stabilizer to transfer the F22 interface.
• Multiple Expansion Interface: The side reserving 1/4" threaded hole and Arri positioning hole, can be extended to the magic arm/gear mount and other accessories.
• F22 Quick Release Ecology DJI Ronin Series

FALCAM F22&F38&F50 Quick Release Camera L-Bracket (FOR SONY ZV-E1) C00B3503W

Key Features

• New Color Debuts: The new color ribbon silk silver vs the classic gray opens a new era of dual color, endowing ZV-E1 with different personal styles.
• Travel Lightly, Enjoy the Original Grip: The buttons are unobstructed, and the battery is easily removed and replaced.
• Switch Freely, Horizontal or Vertical Shot: There are F38 quick-release mounts on the bottom/side, and can quickly switch between horizontal and vertical shooting modes.
• F22/F38/F50 Full Quick Release Ecosystem: Compatible with the full ecology of FALCAM quick release gear, the accessories can be freely expanded to meet the quick release needs of multiple scenarios such as stabilizers, tripods, and sliders.
• Multiple Mounting Holes: This device features quick release mounting, a cold shoe mount, and both 1/4"-20 and Arri positioning threads for versatile accessory attachment.
• Stable and Durable: It is made of high-strength aluminum alloy and has a built-in anti-slip pad to protect the camera carefully.